Blue Sea + Kildala Plate Fuse box

The manufactory are Blue Sea for the fuse box (model 5025) and Kildala for the plate

The box was about $45 and the plate I don't know yet.

I decide to keep it hot all the time. If I need to install a relay, I figure out that I always can install a relay after the fuse box.

First I took some measurements on the Blue Sea box, to have the plate done.
Blue sea fuxe box

 

This is the fuse box, on top of Kildala plate
BMW GS

 

I got screws at the PepBoys, metric and drill the plate. of course I drill on the wrong place at the first time.

I drilled to low, so the round connector that goes on top of the air filter was on the way of the wires when I finished the installation. Do all again...
Kildala plate for BMW GS

The second time was better. There are not much space to play around, so I decide to drill like on the middle right of the plate, so I have room to install a relay on the left, if I ever want it.

BMW GS 1150 fuse box

Now you can see it with the tank on top. note that there are not much space left on the sides, top or bottom.
Fuse Block on BMW GS

Final shot. Took me about 4 hours to do it and wire the Zumo sound/power cables. If I was doing only the fuse box probably would take me 1 hour (discount the time I waist doing the drill again).
Fuse Block

More GS add ons